Return To Surplus Asset Auctions Automated Chrome Plating Line Year 1995 Located in York, PA Scroll Down To View Description
Equipment Description: NAPCO Automated Arm-Style Return Type Machine (RTM) for Nickel/Chrome Application - This RTM is an inline "Dwell Type" Plating Machine arranged in a continuous loop with carrier arms supporting the work. The mechanism lifts, indexes, and lowers the work through the process tanks, returning it to the same place that it was loaded. Machine production and control is accomplished via a programmable logic controller (PLC). Production Rate: productin rate is based on approx 62 carrier arms per hour. Each arm will support 2 racks for a production rate of 124 racks per hour (this can be modified slightly by adjusting dwell times, current cycle is 112 racks per hour). Rack Size (Window): 22" direction of travel (D.O.T.) x 14" counter direction of travel (C.D.O.T.) x 60" long with 12" long hook Effective Surface Area per Rack: 10 sq feet, 100 sq inches (for rack strip) Lift Capacity: 200 lbs gross each rack with parts Carrier Spacing: 30 inches Type of Carrier: double file Total Number of Carriers: 103 Approx Cycle Time: 58 seconds Approx Transfer Time: 35 seconds Approx Dwell Time: 23 seconds Anode Rod Centers: 30 inches Sprocket Centers: 125 feet Solution Level: 70 inches Solution Freeboard: 6 inches Electrical Characteristics: 480 volt / 3 phase / 60 hertz Heating Method: 30 PSIG steam (supplied by customer) Heat Up Time: 24 hours, 6 hours for carbon treatment Cooling Water Temperature: 45 degree F chiller Rectifiers: PEC Filtration: (3) industrials, (12) summit, (1) anode products Approx Overall Cubic Floor Space Required for Equipment: 175 ft. long x 40 ft. wide x 20 ft. high