Equipment Description:
NAPCO Automated Overhead Hoist Machine for Zinc/Chromate Application - Machine production and control is accomplished via a single fully-automated hoist transfer system coupled to a programmable logic controller (PLC). Note that the hoist can be operated manually.
Production Rate: Approx. (6) barrels or racks per hour
Master Cycle Time: Approx. 10 minutes
Barrel Size(Window): 16" dia. x 36" long
Rack Size (Window): 16" direction of travel (D.O.T.) x 36" counter direction of travel (C.D.O.T.) x 24" long
Effective Surface Area per Barrel: 60 sq feet
Effective Surface Area per Rack: 3 sq feet
Volume per Barrel: Approx. 2 cubic feet at 50% capacity
Work Weight: 180 lbs
Number of Programmed Hoists on Machine: 1
Hoist Lift Capacity: 750 lbs
Height of Lift: 47 inches
Anode Rod Centers: 30 inches
Electrical Characteristics: 480/3/60
Heat-Up Time: 2 Hours (ambient assumed at 65 degrees F)
Heating Method: steam 30 PSIG at tank
Cooling Water: 45 degree F chiller
Solution Level: 34 inches
Process Solution Freeboard: 4 inches from tank lip
Recitfiers: PEC (with individual rectifiers for each of the six stations in the zinc tank)
Approx Overall Cubic Floor Space Required for Equipment: 107 ft. long x 12 ft. wide x 15 ft. high |
